Canon PowerShot SX700 HS User Manual
Page 118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
7
Enter the access point
password.
z
z
Press the <
m> button to access the
keyboard, and then enter the password
(
).
z
z
Press the <
o><p> buttons or turn the
<
5> dial to choose [Next], and then
press the <
m> button.
8
Choose [Auto] and establish the
connection.
z
z
Press the <
o><p> buttons or turn the
<
5> dial to choose [Auto], and then
press the <
m> button.
z
z
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9
Enter the authentication code.
z
z
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z
z
A six-digit confirmation number is
displayed.
10
Check the confirmation
numbers and complete the
setup process.
z
z
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z
z
Press the <
q><r> buttons or turn the
<
5> dial to choose [OK], and then press
the <
m> button.
z
z
Complete the setup process on the
smartphone or computer.
z
z
[
] (
) and CANON iMAGE
GATEWAY are now added as
destinations, and the [
] icon changes
to [
].
z
z
A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
step 2 (
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
Compatible Access Points” (