Accessing the wi-fi menu, Initial connection via wi-fi, After the initial wi-fi connection – Canon PowerShot SX700 HS User Manual
Page 123: Wi-fi connections, And so on. note that the length and type of, Note that before using wi-fi, You will need to register a camera, Access the wi-fi menu, Choose
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
123
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Accessing the Wi-Fi Menu
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when
connecting to other devices via Wi-Fi.
1
Access the Wi-Fi menu.
z
z
Press the <
1> button to turn the camera
on.
z
z
Press the <
o> button.
2
Enter a nickname.
z
z
Press the <
m> button to access the
keyboard, and then enter a nickname
(
).
z
z
Up to 16 characters can be used.
z
z
Press the <
o><p> buttons or turn the
<
5> dial to choose [OK], and then press
the <
m> button.
z
z
The Wi-Fi menu is displayed.
•
When connecting wirelessly to any device other than a computer, a memory
card must be inserted in the camera. Additionally, the memory card must
contain images before you can access Web services or connect to a printer
wirelessly.
•
To change the camera’s nickname, choose MENU (
) > [
3] tab > [Wi-Fi
Settings] > [Change Device Nickname].
•
If the Wi-Fi menu is not displayed but only the information changes when
you press the <
o> button, first press the <p> button to switch from detailed
•
A message will be displayed if the nickname you attempt to enter in step 2
begins with a symbol or space. Press the <
m> button and enter a different
nickname.
After the Initial Wi-Fi Connection
•
Once you have connected to devices via Wi-Fi, recent destinations will
be listed first when you access the Wi-Fi menu by pressing the <
o>
button. You can easily connect again by pressing the <
o><p> buttons
to choose the device name and then pressing the <
m> button.
•
To add a new device, display the device selection screen by pressing the
<
q><r> buttons, and then configure the setting.
•
If you prefer not to display recent target devices, choose MENU (
[
3] tab > [Wi-Fi Settings] > [Target History] > [Off].