Changing the focus setting – Canon PowerShot SX700 HS User Manual

Page 78

Advertising
background image

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

78

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Still Images

Shooting with Servo AF

This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.

1

Configure the setting.

z

z

Press the <

n> button, choose

[Servo AF] on the [

4] tab, and then

choose [On] (

=

24

).

2

Focus.

z

z

The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.

Focusing may not be possible in some shooting conditions.

In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this

case, the focus and exposure are set according to the specified AF
frame mode.

If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.

AF lock shooting is not available.

[AF-Point Zoom] on the [

4] tab (

=

24

) is not available.

Not available when using the self-timer (

=

37

).

Still Images

Changing the Focus Setting

You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
halfway.

z

z

Press the <

n> button, choose

[Continuous AF] on the [

4] tab, and then

choose [Off] (

=

24

).

On

Helps avoid missing sudden photo opportunities, because the camera
constantly focuses on subjects until you press the shutter button halfway.

Off

Conserves battery power, because the camera does not focus constantly.

Advertising