Constantly displaying faces at the same size – Canon PowerShot SX700 HS User Manual
Page 35
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
35
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
To deactivate digital zoom, choose MENU (
) > [
4] tab > [Digital
Zoom] > [Off].
Still Images
Movies
Reacquiring Subjects Lost after Zooming
(Framing Assist – Seek)
If you lose track of a subject while zooming in, you can find it more easily by
temporarily zooming out.
1
Look for the lost subject.
z
z
Press and hold the <
> button.
z
z
The camera zooms out and displays a
white frame around the area previously
shown (before you pressed the <
>
button).
2
Reacquire the subject.
z
z
Aim the camera so that the subject enters
the white frame, and then release the
<
> button.
z
z
The previous magnification is now
restored, so that the area outlined in
white fills the screen again.
•
Some shooting information is not displayed while the camera is
zoomed out.
•
During movie shooting, the white frame is not displayed if you press
the <
> button. Also note that a changed zoom factor and camera
operating sounds will be recorded.
•
If you prefer to shoot at the zoom factor of the screen in step 1, press the
shutter button all the way down.
•
You can adjust the zoom factor that the camera will revert to after Zoom
Framing Assist (when you release the <
> button) by moving the zoom lever
as you hold the <
> button to resize the white frame.
•
To adjust how much the camera zooms out when the <
> button is pressed,
) and choose one of the three levels in [
4] tab >
[
Display Area].
•
The zoom factor cannot be changed with the <
> button after you press the
shutter button all the way down in self-timer mode (
Still Images
Movies
Constantly Displaying Faces at the Same Size
When a person’s face is detected (
), the camera will try to maintain
a constant face size relative to the screen. If the person moves closer, the
camera will automatically zoom out, and vice versa.
1
Determine the desired face size.
z
z
Move the zoom lever as needed until the
face is the desired size, relative to the
screen.
2
Enter Auto mode.
z
z
Press and release the <
> button
quickly.
z
z
[
Auto: On] is displayed.