Canon PowerShot SX700 HS - Manual (Page 17)

Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
17
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
Compose the shot.
z z To zoom in and enlarge the subject, move
the zoom lever toward <
i> (telephoto),
and to zoom away from the subject, move
it toward <
j> (wide angle).
4
Shoot.
Shooting Still Images
Focus.
z z
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
z z If [Raise the flash] appears on the screen,
move the <
h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
z z Press the shutter button all the way
down.
z z As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z z
Keep the camera still until the shutter
sound ends.
z z
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
z z
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
z z
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
z z
Frames displayed around any detected
faces indicate that they are in focus.
z z Once recording begins, take your finger
off the movie button.
Elapsed Time