Canon PowerShot SX700 HS User Manual
Page 15
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
15
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Set the date and time.
z
z
Press the <
q><r> buttons to choose an
option.
z
z
Press the <
o><p> buttons or turn the
<
5> dial to specify the date and time.
z
z
When finished, press the <
m> button.
3
Set the home time zone.
z
z
Press the <
q><r> buttons to choose
your home time zone.
4
Finish the setup process.
z
z
Press the <
m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
z
z
To turn off the camera, press the power
button.
•
Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•
To set daylight saving time (1 hour ahead), choose [
] in step 2 and then
choose [
] by pressing the <
o><p> buttons or turning the <5> dial.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z
z
Press the <
n> button.
2
Choose [Date/Time].
z
z
Move the zoom lever to choose the [
3]
tab.
z
z
Press the <
o><p> buttons or turn the
<
5> dial to choose [Date/Time], and
then press the <
m> button.
3
Change the date and time.
z
z
Follow step 2 in “Setting the Date and
Time” (
) to adjust the settings.
z
z
Press the <
n> button to close the
menu.
•
Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
•
The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
separately,
), even if the camera is left off.
•
Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (