Connecting via an access point, Confirming access point compatibility, Or via an access point – Canon PowerShot SX700 HS User Manual

Page 124: Smartphone

Advertising
background image

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

124

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Connecting via an Access Point

Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.

Confirming Access Point Compatibility

Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Wi-Fi” (

=

189

).

If you are already using Wi-Fi, confirm the following items. For instructions
on checking network settings, refer to the access point user manual.

If system administrator status is needed to adjust network settings,
contact the system administrator for details.

These settings are very important for network security. Exercise

adequate caution when changing these settings.

Check sheet

Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.

Network authentication / data encryption
(encryption method / encryption mode)
The method for encrypting data during wireless transmission.

○ None

○ WEP (open system
authentication)
○ WPA-PSK (TKIP)

○ WPA-PSK (AES)

○ WPA2-PSK (TKIP)

○ WPA2-PSK (AES)

Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network
key”.
Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption.

○ 1

Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with
your access point to check if it supports WPS.

A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.

This guide refers to all Wi-Fi routers and base stations as “access points”.

If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing MENU (

=

24

) > [

3] tab > [Wi-Fi Settings] >

[Check MAC Address].

Advertising