Inserting the battery pack and memory card – Canon PowerShot ELPH 340 HS User Manual
Page 11
11
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see “Number of Shots/Recording
•
Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery pack.
Inserting the Battery Pack and Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(
).
1
Open the cover.
z
z
Slide the cover ( ) and open it ( ).
2
Insert the battery pack.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
3
Check the card’s write-protect
tab and insert the memory card.
z
z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
z
z
Insert the memory card facing as shown
until it clicks into the locked position.
z
z
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
z
z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
z
z
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
Terminals
Battery
Lock
Terminals