Canon PowerShot ELPH 340 HS - Manual (Page 88)

88
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8 Choose [Auto] and establish the
connection.
z z Press the < o><p> buttons to choose
[Auto], and then press the < m> button.
z z Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9 Enter the authentication code.
z z On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z z A six-digit confirmation number is
displayed.
10 Check the confirmation
numbers and complete the
setup process.
z z Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z z Press the < q><r> buttons to choose
[OK], and then press the < m> button.
z z Complete the setup process on the
smartphone or computer.
z z [ ] ( = 106 ) and CANON iMAGE
GATEWAY are now added as
destinations, and the [ ] icon changes
to [ ].
z z A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
step 2 ( = 89 ).
• You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
Compatible Access Points” ( = 94 – 95 ).