Canon PowerShot ELPH 340 HS - Manual (Page 39)

39
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red-
eye when the flash is used in low-light shots.
1 Access the [Flash Settings]
screen.
z z Press the < n> button, choose [Flash
Settings] on the [ 4] tab, and then press
the < m> button ( = 22 ).
2 Configure the setting.
z z Choose [Red-Eye Lamp], and then
choose [Off] ( = 22 ).
z z To restore the original setting, repeat this
process but choose [On].
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1 Access the [Review image after
shooting] screen.
z z Press the < n> button, choose
[Review image after shooting] on the
[ 4] tab, and then press the <m> button
( = 22 ).
2 Configure the setting.
z z Press the < o><p> buttons to choose
[Display Time]. Press the < q><r>
buttons to choose the desired option.
z z To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specified time. Even while the shot is displayed,
you can take another shot by pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.