Canon PowerShot ELPH 340 HS - Manual (Page 97)

97
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Connecting to Access Points in the List
1 View the listed access points.
z z View the listed networks (access
points) as described in steps 1 – 4 of
“Connecting to WPS-Compatible Access
Points” ( = 94 ).
2 Choose an access point.
z z Press the < o><p> buttons to choose a
network (access point), and then press
the < m> button.
3 Enter the access point
password.
z z Press the < m> button to access the
keyboard, and then enter the password
( = 93 ).
z z Press the < o><p> buttons to choose
[Next], and then press the < m> button.
4 Choose [Auto].
z z Press the < o><p> buttons to choose
[Auto], and then press the < m> button.
z z If you selected [ {], [2], or [ ] as the
target device, see “Connecting to WPS-
Compatible Access Points”, starting with
step 9 ( = 95 ).
z z If you selected a Web service as the
destination, see “Connecting to WPS-
Compatible Access Points”, starting with
step 12 ( = 96 ).
• To determine the access point password, check on the access point itself or
refer to the user manual.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow on-
screen instructions and enter an SSID, security settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, press the < o><p> buttons to choose [Next], and
then press the < m> button.