Canon PowerShot ELPH 340 HS - Manual (Page 113)

113
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” ( = 12 ).
1 Specify your destination.
z z Choose [Time Zone], and then press the
< m> button.
z z Press the < o><p> buttons to choose
[ World], and then press the < m>
button.
z z Press the < q><r> buttons to choose the
destination.
z z To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
< o><p> buttons, and then choose [ ]
by pressing the < q><r> buttons.
z z Press the < m> button.
2 Switch to the destination time
zone.
z z Press the < o><p> buttons to choose
[ World], and then press the < n>
button.
z z [ ] is now shown on the shooting screen
( = 143 ).
• Adjusting the date or time while in [ ] mode ( = 13 ) will automatically
update your [ Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the < 1> button in Shooting mode ( = 19 ). To have the lens retracted
immediately after you press the < 1> button, set the retraction timing to
[0 sec.].
z z Choose [Lens Retract], and then choose
[0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1 Configure the setting.
z z Choose [Eco Mode], and then choose
[On].
z z [ ] is now shown on the shooting
screen ( = 143 ).
z z The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.