Shooting long exposures, Shooting long exposures (long shutter), High-speed continuous shooting – Canon PowerShot ELPH 340 HS User Manual

Page 50: High-speed burst), High-speed continuous shooting (high-speed burst)

Advertising
background image

50

Before Use

Basic Guide

Advanced Guide

Camera Basics
Auto Mode / Hybrid

Auto Mode
Other Shooting

Modes
P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Before Use

Basic Guide

Advanced Guide

Camera Basics
Auto Mode / Hybrid

Auto Mode
Other Shooting

Modes
P Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Still Images

Shooting Long Exposures (Long Shutter)

Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this

case, mount the camera on a tripod or take other measures to prevent

camera shake.

1

Choose [N].

z

z

Follow steps 1 – 2 in “Specific Scenes”

(

=

42

) and choose [

N].

2

Choose the shutter speed.

z

z

Press the <

o> button, press the

<

q><r> buttons to choose the shutter

speed, and then press the <

m> button.

3

Check the exposure.

z

z

Press the shutter button halfway to view

the exposure for your selected shutter

speed.

4

Shoot.

On-screen image brightness in step 3, when you pressed the

shutter button halfway, may not match the brightness of your shots.

With shutter speeds of 1.3 seconds or slower, there will be a delay

before you can shoot again, as the camera processes images to

reduce noise.

Set [IS Mode] to [Off] when using a tripod or other means to secure

the camera (

=

63

).

If the flash fires, your shot may be overexposed. In this case, set the flash to

[

!] and shoot again (

=

62

).

Still Images

High-Speed Continuous Shooting

(High-Speed Burst)

You can shoot a series of shots in rapid succession by holding the shutter

button all the way down. For details on the continuous shooting speed, see

“Continuous Shooting Speed” (

=

155

).

1

Choose [ ].

z

z

Follow steps 1 – 2 in “Specific Scenes”

(

=

42

) and choose [ ].

2

Shoot.

z

z

Hold the shutter button all the way down

to shoot continuously.

z

z

Each set of images shot continuously is

managed as a single group, and only the

first image in that group will be displayed

(

=

44

).

The resolution is [

] (2304 x 1728) and cannot be changed.

Focus, image brightness, and color are determined by the first shot.

Shooting may stop momentarily or continuous shooting may slow down

depending on shooting conditions, camera settings, and the zoom position.

As more shots are taken, shooting may slow down.

Advertising