Canon PowerShot ELPH 340 HS - Manual (Page 70)

70
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Image Viewing Options
Still Images
Magnifying Images
1 Magnify an image.
z z Moving the zoom lever toward < k> will
zoom in and magnify the image. You
can magnify images up to about 10x by
continuing to hold the zoom lever.
z z To zoom out, move the zoom lever
toward < g>. You can return to single-
image display by continuing to hold it.
2
Move the display position and
switch images as needed.
z z To move the display position, press the
< o><p><q><r> buttons.
z z While [ ] is displayed, you can switch
to [ ] by pressing the < m> button.
To switch to other images while zoomed,
press the < q><r> buttons. Press the
< m> button again to restore the original
setting.
• You can return to single-image display from magnified display by pressing the
< n> button.
Approximate Position of
Displayed Area
Still Images Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
z z Press the < m> button, choose [.] in
the menu, and choose the desired option
( = 21 ).
z z The slideshow will start after [Loading
image] is displayed for a few seconds.
z z Press the < n> button to stop the
slideshow.
• The camera’s power-saving functions ( = 19 ) are deactivated
during slideshows.
• To pause or resume slideshows, press the < m> button.
• You can switch to other images during playback by pressing the < q><r>
buttons. For fast-forward or fast-rewind, hold the < q><r> buttons down.
• In image search mode ( = 68 ), only images matching search conditions are
played.
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1 Access the setting screen.
z z Press the < n> button, and then
choose [Slideshow] on the [ 1] tab
( = 22 ).