AT&T CL4939 - Manual (Page 23)

17
Telephone settings
Menu setup
Screen display Function Options
# OF RINGS Set how many times the telephone rings before the
answering system picks up the call.
If you choose tS 2-4 (or tS 4-6), the answering
system answers after two (or four) rings when
there are new messages. When there are no new
messages, the answering system answers after four
(or six) rings. When you are retrieving messages from
a long distance call, it disconnects your call after
three (or five) rings to avoid long distance charges.
(These
tS settings are also known as toll saver.)
Refer to To set the number of rings on page 44 for
details.
2, 3, 4*, 5, 6, 7,
tS 2-4, tS 4-6
MESSAGE ALERT Set whether there is an audible message alert every 15
seconds when there are new messages. ON
OFF*
REMOTE CODE Select a three-digit number to allow remote access
from another telephone (away from your home or
office).
Refer to Remote access on page 51 for details.
NOTE: If the remote code you entered is the
same as the priority code, the telephone plays an
error tone when you save it.
500*
PRIORITY CODE Select a three-digit number as your priority code for
the answering system.
Refer to Priority call on page 50 for details.
999*
CALL SCREENING Choose whether incoming messages are played
through the speaker while they are being recorded.
Refer to Call screening on page 50 for details.
ON*
OFF