AT&T CL4939 - Manual (Page 34)

28
Speed dial memory
Reviewing and dialing a speed dial
number
To review speed dial numbers
Use the following steps to review numbers stored
in the speed dial memory locations.
When the telephone is idle, press MEM. The
screen shows ENTER LOCATION.
Press a dial pad key ( 0 through 9) to choose
the desired speed dial memory location. The
number is displayed on the screen.
Press
FLASH to return to idle mode.
NOTES:
If there is no number in the speed dial memory
location you selected in step 2, the telephone
shows
------------ in the second row.
The screen can show up to 12 digits in the
second row. So, if the number is longer than 12
digits, the screen only shows the last 12 digits.
To dial a speed dial number
Use the following steps to dial a desired telephone
number stored in the speed dial memory location.
Follow steps 1 and 2 in To review speed dial
numbers on this page to find the desired entry.
Press
DISPLAY DIAL to dial using the
speakerphone or press DISPLAY DIAL and then
lift the handset to dial using the handset.
-OR-
Lift the handset or press SPEAKER.
Press MEM. The screen shows ENTER LOCATION.
Press a dial pad key ( 0 through 9) to choose
the desired speed dial memory location. The
telephone dials the number automatically.
NOTE: If there is no number in the speed dial
memory location when you press DISPLAY DIAL,
the telephone plays an error tone.
1.
2.
3.
•
•
1.
2.
1.
2.
3.
12:00 AM 11-20 15
ENTER LOCATION
_
12:00 AM 11-20 15
8887227702
12:00 AM 11-20 15
888-722-7702
12:00 AM 11-20 15
ENTER LOCATION
_