AT&T CL4939 - Manual (Page 58)

52
Answering system operation
Remote access
Replay current or
previous message
4 Press while the telephone is playing
the day and time the current message
was received to go back to the
previous message.
Press after the telephone plays the
day and time the current message was
received to repeat the message.
Stop
5 Press to stop playback.
Skip to next message
6 Press during playback to skip the
current message and advance to the
next message.
Turn system on or off
0 Press to turn the answering system on
or off.
NOTES:
If the answering system is off, the system
answers the incoming call after 10 rings and
announces, “Enter remote access code.” The
telephone does not record messages and
automatically hangs up after waiting for the
remote access code for 15 seconds.
If the recording memory is full, the answering
system answers the incoming call after 10
rings and announces, “Memory is full. Enter
remote access code.” The telephone does not
record messages and hangs up automatically
after waiting for the remote access code for 15
seconds.
If no command is entered within 15 seconds
during remote access, the telephone
automatically hangs up the call with a beep.
There is a wallet card listing the remote
commands at the back of this user’s manual.
Cut it out and keep it in your wallet for quick
reference. •
•
•
•