AT&T CL4939 - Manual (Page 33)

27
Speed dial memory
Speed dial memory overview and
storage
Speed dial memory overview
This telephone has 10 speed dial memory
locations where you can store telephone numbers
you wish to dial using fewer keys than usual.
Each speed dial memory location can store a
telephone number with up to 24 digits.
Speed dial memory storage
Use the following steps to store a telephone
number in a desired speed dial memory location.
When the telephone is idle, press MEM. The
screen shows ENTER LOCATION.
Press SELECT. The screen displays
ENTER NUMBER.
To copy the last number dialed, press
REDIAL/
PAUSE
(up to 24 digits).
-OR-
Use the dial pad keys to enter the telephone
number (up to 24 digits).
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press
REDIAL
/PAUSE. A P appears on the screen.
Press MEM or SELECT. The screen shows
ENTER LOCATION.
Press a dial pad key (
0 through 9) to choose
the desired speed dial memory location for the
new entry. The screen shows
STORED with a
confirmation tone and then returns to idle mode.
NOTES:
If you enter more than 24 digits in step 3, the
screen shows
ONLY 24 ALLOWED with an error
tone.
If the speed dial memory location you selected
in step 5 is occupied, the new telephone
number replaces the old one. Take caution not
to replace entries you do not wish to delete
from the speed dial memory locations.
1.
2.
3.
•
•
4.
5.
•
•
12:00 AM 11-20 15
ENTER NUMBER
8887227702_
12:00 AM 11-20 15
ENTER LOCATION
_
12:00 AM 11-20 15
STORED
Speed dial memory
12:00 AM 11-20 15
ENTER LOCATION
_