AT&T CL4939 - Manual (Page 45)

39
Caller ID operation
Storing a call history entry in the
directory
Use the following steps to store the telephone
number and name of a call history entry in the
directory.
When the telephone is idle, press CID/ to
enter the call history.
Press
DIR
/ or
CID
/ to scroll to the desired
caller ID entry.
Press
MENU to store the displayed telephone
number in the directory. The screen shows
STORED with a confirmation tone, then returns
to the call history.
-OR-
If you need to add or remove the area code
or a 1 at the beginning of the number, do the
following:
Press SELECT repeatedly to scroll through
the various dialing formats (1 + area code +
seven-digit number, seven-digit number, 1 +
seven-digit number, or area code + seven-
digit number).
Press
MENU to store the displayed telephone
number in the directory. The screen shows
STORED with a confirmation tone, then
returns to the call history.
Press FLASH to return to idle mode.
NOTES:
If there is no telephone number in the displayed
call history entry when you press
MENU in step
3, the telephone plays an error tone.
If the directory is full, the screen shows
MEMORY FULL and plays an error tone.
1.
2.
3.
a.
b.
4.
•
•
12:00 AM 11-20 16 15
CHRISTINE SMITH
888-722-7702
12:00 AM 11-20 15
STORED