AT&T CL4939 - Manual (Page 25)

19
Telephone settings
Menu setup
Set home area code
Set the call log to store only seven digits of local
telephone numbers. If you dial 10 or 11 digits for
calls within your own area code, leave this blank
or enter 000.
For calls within your area code:
If you dial: Enter in step 2:
7 digits
(telephone number, no area code)
Your area code
10 digits
(area code + telephone number)
-OR-
11 digits
(1 + area code + telephone number)
000
Press MENU repeatedly until the screen shows
HOME AREA CODE.
Use the dial pad keys (
0 through 9) to enter the
three digits of your home area code.
Press
SELECT or MENU to save the setting. The
local area code setup screen displays.
Set local area code
Program up to four local area codes that do not
require dialing a 1 before them. If you dial 10
digits (area code + telephone number) for calls
within your own area code, include your area code
as a local area code.
For calls outside your area:
For: If you dial: Enter in step 2:
All calls outside
your area code
11 digits
(1+ area code +
telephone number)
No local area code
Some calls outside
your area code
10 digits
(area code +
telephone number)
Area codes that do
not require 1
Press MENU repeatedly until the screen shows
LOCAL AREA CODE.
Use the dial pad keys (
0 through 9) to enter
the three digits of the first local area code in
LAC 1. Press SELECT or MENU repeatedly to
advance to the next local area code (
LAC 2,
LAC 3 or LAC 4).
1.
2.
3.
1.
2.
12:00 AM 11-20 15
HOME AREA CODE
HAC ---
12:00 AM 11-20 15
LOCAL AREA CODE
LAC 1 ---