AT&T 1030 - Manual (Page 14)

SPEAKER
You can use your voice terminal’s speaker to monitor a call as
you dial it, to monitor a call on hold, and to let a group listen to
your conversation.
On-Hook Dialing
Instead of using your handset to listen while you place a call,
you can use your voice terminal’s built-in speaker:
Touch Speaker.
The green light next to Speaker goes on, and you hear a dial tone
through your voice terminal’s speaker
Dial the number.
When you hear the other person answer, lift your handset.
Speaker
●
●
●
●
●
●
●
+ +
Speaker
If the line is busy, or if you get no answer:
Touch Speaker to cancel the call.
You can use On-Hook Dialing any time instructions tell you to
lift your handset before dialing. Simply touch Speaker instead
of lifting your handset.
Monitor-on-Hold
When you’ve been put on hold, you can hang up and continue
working while you wait for the person to return to the call:
Touch Speaker.
Hang up.
When you hear the other person return to the call, lift your
handset.
outside
number
Speaker
+ +
13