AT&T 1030 - Manual (Page 39)

The feature remains active until you:
Touch Privacy again.
The green light next to the button goes off.
Privacy
TOUCH-TONE ENABLE
(Only for systems with rotary lines)
If you have telephone lines that carry rotary signals, you can use
the Touch-Tone Enable feature to switch to Touch-Tone signals
midway through a dialing sequence. This lets you take advan-
tage of bank-by-phone, credit card authorization, and alternate
long distance services.
To program:
●
T/P to P
●
Touch the button
●
Dial *76
●
T/P to center
To switch from rotary pulse to Touch-Tone signals as you dial a
number:
●
●
●
●
●
Lift your handset.
Dial the first part of the number.
Touch Touch-Tone Enable.
Dial the remaining numbers.
+ + + Touch-Tone
Enable
The Touch-Tone Enable feature turns off when you hang up your
handset or touch Recall.
38