AT&T 1030 - Manual (Page 26)

LAST NUMBER REDIAL
Use the Last Number Redial feature to redial the number you
dialed most recently. (The number cannot contain a pause, a
stop, a Touch-Tone enable, or a switchhook flash.) If you have
a 34-button voice-terminal, you can follow the programming in-
structions below to program this feature onto a button. If you
have a 5- or 10-button voice terminal, you can dial a code to use
this feature and save a button for another use.
To program:
●
T/P to P
●
Touch the button
●
Dial *73
●
T/P to center
If you program a Last Number button, you can redial the number
you most recently called with the touch of a button:
Lift your handset.
Touch Last Number.
+ Last Number
Using a Dial Code (5- and 10-button voice terminals only)
●
●
●
●
To redial a number using the Last Number Redial code:
Lift your handset. +
Dial #24.
#24
MANUAL SIGNALING
Use the Manual Signaling feature to generate a beep at a
coworker’s voice terminal. Assign a Manual Signaling button to
each person you want to signal.
To program:
●
T/P to P
●
Touch the button
●
Dial * 6
+ an intercom number
●
T/P to center
25