AT&T 1030 - Manual (Page 25)

stop, a Touch-Tone enable, or a switchhook flash.) If you have
a 34-button voice terminal, use the instructions below to pro-
gram a button with the Saved Number Redial feature. If you have
a 5- or 10-button voice terminal, there’s no need for any special
programming. You simply dial a code to use this feature, thus
saving a feature button for a custom feature that requires a
button.
To program:
●
T/P to P
●
Touch the button
●
Dial *74
●
T/P to center
If you program a Saved Number button, you can save a number
with the touch of a button. So when you dial a number you want
to redial later:
● Before hanging up, touch Saved Number.
When you want to save a new number, repeat the above
procedure.
To redial the number later:
● Lift your handset.
● Touch Saved Number.
Using a Dial Code (5- and 10-button voice terminals only)
+ Saved Number
When you dial a number you want to save for later redialing:
●
Before hanging up, dial #23.
To redial the number you saved:
●
Lift your handset.
● Dial #23.
Saved Number
#23
+
#23
24