AT&T 1030 - Manual (Page 37)

●
●
●
●
To restore Call Coverage:
Touch Coverage Inhibit again.
The green light next to the button goes off.
Using Call Coverage and Coverage Inhibit to Forward Calls
You can set up a call forwarding feature using Call Coverage
and Coverage Inhibit. If you are often away from your voice ter-
minal, but near another voice terminal connected to your
MERLIN system:
Program a Cover button on the other voice terminal to cover
your calls.
Calls to you ring at the other voice terminal as well as at your own.
When you want calls to ring only at your voice terminal:
Touch Coverage Inhibit.
DO NOT DISTURB
If you don’t want to be interrupted as you work, use the Do Not
Disturb feature to prevent calls from ringing at your voice ter-
minal. Program this feature on a button with lights.
To program:
●
T/P to P
●
Touch the button
●
Dial *71
●
T/P to center
To prevent calls from ringing at your voice terminal:
Touch Do Not Disturb.
The green light next to the button goes on.
Coverage
Inhibit
Coverage
Inhibit
Do Not Disturb
36