LG PQNFB17B0 - Manual (Page 53)

BACnet Protocol Implementation Conformance Statement (PICS)
Data Link Layer Options:
BACnet IP, (Annex J)
■ BACnet IP, (Annex J), Foreign Device
❏ ISO 8802-3, Ethernet (Clause 7)
❏ ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
❏ ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s)
❏ MS/TP master (Clause 9), baud rate(s):
❏ MS/TP slave (Clause 9), baud rate(s):
❏ Point-To-Point, EIA 232 (Clause 10), baud rate(s):
❏ Point-To-Point, modem, (Clause 10), baud rate(s):
❏ LonTalk, (Clause 11), medium:
❏ Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with
MS/TP slaves and certain other devices.)
❏ Yes ■ No
Networking Options:
❏ Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
❏ Annex H, BACnet Tunneling Router over IP
❏ BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices?
❏ Yes ■ No
Character Sets Supported:
Indicating support for multiple character sets does not imply that they can all be supported
simultaneously.
■ ANSI x 3.4
❏ IBM™‚/Microsoft¢‚ DBCS ❏ ISO 8859-1
❏ ISO 10646 (UCS-2) ❏ ISO 10646 (UCS-4) ❏ JIS C 6226
If this product is a communication Gateway, describe the types of non-BACnet equipment/networks(s)
that the Gateway supports:
This Gateway converts BACnet protocol into LGAP(LG Aircon protocol), so that the outdoor unit of the
A/C which is connected to the Gateway is able to communicate in 485-communication.
Installation/Owner Manual 53
ENGLISH