HP ROM-Based Setup Utility - Manual (Page 44)

HP Smart Array B320i RAID Configuration
NOTE: This option is available only on server models that support Dynamic Smart Array. For
more information, see the HP Dynamic Smart Array RAID Controller User Guide on the HP website
(
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?
docId=emr_na-c03326739 ).
IMPORTANT:
•
Changing this setting may result in data loss or data corruption on existing drives.
•
Back up all drives before enabling this feature.
This option controls HP Dynamic RAID support on the SAS controller (embedded or optionally
purchased on a daughter card).
After reading the warning message, press any key to display the following settings:
•
Enabled
•
Disabled
NOTE: The default setting for this option is dependent on the server model.
44 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)