Mps table mode – HP ROM-Based Setup Utility User Manual
Page 106
Advertising
MPS Table Mode
MPS Table Mode (Multi Processor Specification Table/APIC) is used to interrupt routing. Certain
unsupported operating systems may require disabling the MPS Table.
IMPORTANT:
This setting is pre-selected. You can override the default setting at this menu, but
successful OS operation is dependent upon the correct (default) setting.
Options include:
•
Full Table APIC (default)
•
Disabled
106 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)
Advertising