HP ROM-Based Setup Utility - Manual (Page 179)

BIOS Interface Mode
When Auto is selected as the BIOS Interface Mode, CLI mode is automatically selected for this
POST only if the keyboard buffer receives characters from the serial port instead of the keyboard.
When Command-Line is selected, CLI mode is automatically enabled.
Server Asset Text menu
The Server Asset Text menu includes options that customize the system-specific text for the server.
The following menu options are available:
•
“Set Server Info Text” (page 179)
•
“Set Administrator Info Text” (page 179)
•
“Set Service Contact Text” (page 180)
•
“Custom POST Message” (page 181)
Set Server Info Text
The Set Server Info Text option defines reference information for the server. The setting is blank by
default.
•
Server Name defines a two-line name identifying the server. A maximum of 14 characters
can be entered on each line.
•
Server Asset Tag defines a two-line asset tag to identify the server. A maximum of 16 characters
can be entered on each line.
•
Server Primary OS defines a three-line description of the primary OS of the server. A maximum
of 14 characters can be entered on each line.
•
Other Text defines two lines of additional text describing the server. A maximum of 14
characters can be entered on each line.
Set Administrator Info Text
The Set Administrator Info Text option defines reference information for the server administrator.
Server Asset Text menu 179