HP ROM-Based Setup Utility - Manual (Page 76)

Boot Controller Order menu
The Boot Controller Order option selects which of the installed mass storage device controllers is
used as the primary boot controller. The server attempts to boot the drives attached to each storage
controller in the order presented in this list.
By default, the primary boot controller is set to controller 1.
NOTE: Changes made to the Boot Controller Order in the ORCA Utility are reflected in this menu.
For more information about ORCA, see the Configuring Arrays on HP Smart Array Controllers
Reference Guide on the HP website (
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/
docDisplay/?docId=emr_na-c00729544 ).
IMPORTANT: PCI devices that have been disabled in the PCI Devices menu might still be visible
on the Boot Controller Order screen.
76 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)