HP ROM-Based Setup Utility - Manual (Page 182)

•
“Drive Write Cache” (page 185)
•
“SATA Software RAID” (page 185)
•
“Optional PCI-X Riser Fan Monitoring” (page 185)
•
“Processor Options” (page 185)
•
“Power Supply Requirements Override” (page 186)
•
“Embedded VGA Control” (page 187)
NOTE: Menu options may differ from those in this document, depending on specific server
options.
Multi-Processor Specification (MPS) Table Mode
The MPS Table Mode option is automatically set, based on the OS selected, and is used for interrupt
routing.
IMPORTANT: This setting is pre-selected. You can override the default setting at this menu, but
successful OS operation is dependent upon the correct (default) setting.
ROM Selection
The ROM Selection option toggles the server ROM between the current ROM and the backup
ROM. All servers with redundant ROMs enable you to switch to the backup ROM.
182 RBSU menu-driven interface, version 2.xx (G5 and earlier servers)