HP ROM-Based Setup Utility - Manual (Page 48)

Advanced Power Management Options
Depending on your server model, options may include:
•
“Intel QPI Link Power Management” (page 49)
•
“Intel QPI Link Frequency” (page 50)
•
“QPI Bandwidth Optimization (RTID)” (page 51)
•
“Minimum Processor Idle Power Core State” (page 52)
•
“Minimum Processor Idle Power Core C6 State” (page 53)
•
“Minimum Processor Idle Power C1e State” (page 54)
•
“Minimum Processor Idle Power Package State” (page 55)
•
“Minimum Processor Idle Power State” (page 56)
•
“Energy/Performance Bias” (page 57)
•
“Maximum Memory Bus Frequency” (page 58)
•
“Channel Interleaving” (page 59)
•
“Memory Interleaving” (page 60)
•
“PCI Express Generation 2.0 Support” (page 61)
•
“PCIe Gen 3 Control (for select devices)” (page 62)
•
“Maximum PCI Express Speed” (page 63)
•
“Dynamic Power Savings Mode Response” (page 64)
•
“Collaborative Power Control” (page 65)
•
“Power Capping Support” (page 66)
•
“ACPI SLIT Preferences” (page 67)
•
“DIMM Idle Power Saving Mode” (page 68)
•
“DIMM Voltage Preference” (page 69)
•
“Memory Power Savings Mode” (page 70)
•
“HyperTransport Frequency” (page 71)
•
“Dynamic Power Capping Functionality” (page 72)
48 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)