HP ROM-Based Setup Utility - Manual (Page 16)

Embedded NICs
These boot options enable or disable network boot for embedded NICs. These settings provide no
functionality if an embedded NIC is not installed.
NOTE:
•
When enabling Network Boot support for an embedded NIC, the NIC will not show up in the
Standard Boot Order (IPL) until the next reboot.
•
For Gen8 servers, this option is for the embedded LOM or FlexibleLOM.
•
Not every NIC Port is bootable on every FlexibleLOM. Because of this, the RBSU menu may
offer a network boot option that does nothing. To determine which ports are bootable, see
the NIC user documentation.
•
The display differs slightly, based on the number of embedded NICs.
After reading the note message, press any key to display the following settings:
•
Network Boot
•
Disabled
16 RBSU menu-driven interface, version 3.xx or later (G6, G7, and Gen8 servers)