HP Smart Update Manager (User Guide) - Manual (Page 42)

Description Targets
When two OAs are in an enclosure, this argument should
be the active OA. When specifying the IP address, use
either the IPv4 or IPv6 format.
Reduces discovery time for scripted deployments. This is
an optional command line argument. /targettype
The following are valid target types:
•
Server
•
Windows
•
Linux
•
HPUX
•
EVA or Command View for EVA
•
FC Switch or Fibre Channel Switch
•
OA or Onboard Administrator
•
SUPERDOME 2 or SUPERDOME2 or Superdome 2
Onboard Administrator
•
iLO
•
VC or Virtual Connect
•
HP SAS or HP SAS B/L Interconnect Switch
•
VMware or VMware Host
•
iPDU or Intelligent Power Distribution
Unit (iPDU)
Use /targettype with /target parameter. You can
interchange the sequence of /targettype and /target.
If the target name includes spaces, make sure you enclose
the name in quotation marks, “ “.
Enables the credential of the local host to be used as the
credential to access the targets instead of providing the /current_credential
user name and password explicitly for each target. The
assumption is that the current credential is valid for the
targets being accessed. (Applies to Windows only)
This argument provides the user name credential for OA
associated with VC specified with the target /oa_username
command-line parameter. Only one set of OA credentials
can be specified with command-line parameters. You can
add multiple VC targets to command-line parameters with
the target parameter only if the credentials of OAs
associated with specified VCs are the same. The argument
oa_username
is not required if VC has the same
credentials as the associated OA. You do not need to
provide an OA network address associated with VC. HP
SUM queries it from a specified VC target.
To update multiple VCs with different user names and
passwords, or VCs with OAs that have different credentials,
use the corresponding input files OAUID and OAPWD.
Provides the password credential for OA associated with
VC specified with the "target" command-line parameter. /oa_password
Only one set of OA credentials can be specified with
command-line parameters. You can add multiple VC targets
to command-line parameters with the "target" parameter
only if the credentials of OAs associated with specified
VCs are the same. The argument oa_password is not
required if VC has the same credentials as the associated
OA. You do not need to provide an OA network address
42 Using scripts to deploy updates