HP Smart Update Manager (User Guide) - Manual (Page 56)

Possible values Description Parameter
IP address pairs separated by
semicolons (for example,
10.1.1.1/255.255.255.0; HP Systems Management Homepage
uses this parameter to restrict the NICs
and subnets to use for its web servers.
The IP-BINDING parameter must be
set to yes for this parameter to be
IP-BINDING-LIST
10.2.2.2/255.255.255.0)
used during installation. (Applies to
Linux PSP only.)
YES , NO (default) HP Systems Management Homepage
uses this parameter to restrict login
access. (Applies to Linux PSP only.) IP-RESTRICTED-LOGINS
To enable restrictions on who can
log in to the web server, this
parameter must be set to yes, and
values must be provided to the
IP-RESTRICTED-EXCLUDE
or
IP-RESTRICTED-INCLUDE
parameters.
List of IP address ranges separated
by semicolons (for example,
10.1.1.1-10.1.1.10; HP Systems Management Homepage
uses this parameter to exclude specific
IP address/netmask pairs from logging
into the web services. (Applies to Linux
PSP only.) IP-RESTRICTED-EXCLUDE
10.2.2.2-10.2.2.10)
This parameter is ignored unless the
IP-RESTRICTED-LOGINS
parameter
is set to yes.
List of IP address ranges separated
by semicolons (for example,
10.1.1.1-10.1.1.10; HP Systems Management Homepage
uses this parameter to enable login
only from the IP address/netmask
pairs specified. (Applies to Linux PSP
only.) IP-RESTRICTED-INCLUDE
10.2.2.2-10.2.2.10)
This parameter is ignored unless the
IP-RESTRICTED-LOGINS
parameter
is set to yes.
HP Systems Management Homepage
uses this parameter to determine LOCALACCESS-ENABLED •
YES (default to include
anonymous access)
whether to enable local anonymous
•
NO
access to the web services. (Applies
to Linux PSP only.)
HP Systems Management Homepage
uses this parameter to determine the LOCALACCESS-TYPE •
Anonymous (default)
• Administrator
CAUTION: Selecting local
access with administrator
type of access granted to local users.
(Applies to Linux PSP only.)
privileges as the login provides
full access to any user who has
access to the local console,
without prompting for a user
name or password.
HP Systems Management Homepage
uses this parameter to set up the trust TRUSTMODE • TrustByCert—If you use this
value, you must define the
56 Using scripts to deploy updates