HP Smart Update Manager (User Guide) - Manual (Page 70)

To set the rules for the Windows Firewall and Security Policy, click Unblock, and then set your
firewall settings to the following:
1.
Click Start
→Control Panel→Administrative Tools→Windows Firewall with Advanced
Security
→Inbound Rules→Remote Administration (NP-IN).
2. Select Enabled, and then select Allow the connections.
For Direct to iLO support, you must enable ping.
HP SUM fails on Windows hosts due to McAfee firewalls
McAfee firewalls block HP SUM traffic.
Solution: Enable the port traffic associated with the HP SUM application:
1.
From the system tray, click the McAfee icon.
2. Select Manage Features.
3. Select McAfee Host Intrusion Prevention.
4. Select the Activity Log tab.
As displayed in the following image, in the Message column, notice the entry similar to the
following: Blocked Incoming TCP from the HOST (15.255.101.110) during
execution of HP SUM
.
70 Troubleshooting