HP XP P9500 Storage - Manual (Page 197)

Description Item
Some undefined LDEV IDs may appear. A hyphen in the LDEV name indicates the LDEV
is undefined.
LDEV names to be deleted from the resource group. LDEV Name
Parity group ID where the LDEV belongs. Parity Group ID
Pool name where the LDEV belongs. Pool Name (ID)
Capacity of each LDEV. Capacity
Provisioning type of each volume. Provisioning Type
• Basic: Internal volume
•
THP: V-VOLs of Thin Provisioning
• External: External volume
•
Snapshot: Snapshot volume
Attribute of the volume indicating how the volume is being used. Attribute
• Command Device: Command device
•
Remote Command Device: Remote command device
• System Disk: System disk
•
JNL VOL: Journal volume
•
Pool VOL: Pool volume. The number in parentheses is the pool identifier.
• Reserved VOL: Reserved volume
•
Quorum Disk: Quorum disk
• -: Volumes other than the above ones
Journal group ID when the attribute is JNL VOL. A hyphen indicates the attribute is other
than JNL VOL. Journal Group ID
Total number of selected LDEVs. Total
Selected Ports table (when deleting ports)
Description Item
Port IDs that to be deleted from the resource group. Port ID
Attribute of the port indicating I/O flow. Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
•
Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
•
External: Issues I/O commands to a target port of an external storage system with
External Storage.
Total number of selected ports. Total
Selected Host Groups table (when deleting Host Groups)
Description Item
Port IDs that are used by the host group. Port ID
Name and ID of each host group name to be deleted from the resource group. Host Group Name
Remove Resources window 197