HP XP P9500 Storage - Manual (Page 259)

Description Item
The subscription limit is the ratio (%) of the V-VOL capacity that can be configured
to the total capacity of the pool volume. You cannot configure the V-VOL capacity
to exceed the subscription limit. For example, if the pool volume capacity is 100
GB and the subscription limit is 150%, you can configure up to 150 GB of the
capacity of V-VOL.
For Snapshot pool, a hyphen (-) appears.
Number of the pool-VOLs in the pool. Number of Pool VOLs
Information about Smart Tiers. Smart Pool
•
Monitoring Mode: If continuous mode is enabled, Continuous Mode appears.
If the period mode is enabled, Period Mode appears.
• Tier Management. If Smart Tiers is enabled, Auto or Manual of performance
monitoring and tier relocation appears. If Smart Tiers is disabled, a hyphen
(-) appears.
•
Cycle Time: Cycle of performance monitoring and tier relocation. If Smart
Tiers is disabled, a hyphen (-) appears.
• Monitoring Period: Time zone of performance monitoring when 24 Hours is
selected in the Cycle Time list. If Smart Tiers is disabled, a hyphen (-) appears.
Size of the buffer space in use for new page assignments on each tier. Buffer Space for New page
assignment (%)
•
Tier 1: If Smart Tiers is available, the buffer space for new page assignment
to tier 1 appears. Otherwise, a hyphen (-) appears.
•
Tier 2: If Smart Tiers is available, and tier 2 exists, the buffer space for new
page assignment to tier 2 appears. Otherwise, a hyphen (-) appears.
•
Tier 3: If Smart Tiers is available, and tier 3 exists, the buffer space for new
page assignment to tier 3 appears. Otherwise, a hyphen (-) appears.
Size of the buffer space in use for tier relocation on each tier. Buffer Space for Tier relocation (%)
•
Tier 1: If Smart Tiers is available, the buffer space for tier relocation to tier 1
appears. Otherwise, a hyphen (-) appears.
• Tier 2: If Smart Tiers is available, and tier 2 exists, the buffer space for tier
relocation to tier 2 appears. Otherwise, a hyphen (-) appears.
•
Tier 3: If Smart Tiers is available, and tier 3 exists, the buffer space for tier
relocation to tier 3 appears. Otherwise, a hyphen (-) appears.
Opens the Pool Properties window when a pool is selected, and opens the error
window when a pool is not selected or multiple pools are selected. Detail button
Deletes the pool selected in the Selected Pools window. Remove button
Opens the error window when a pool is not selected
Click Next to go to the task setting window, which is indicated in Task Next
Option. Next Task Option
Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Information in this topic assumes only a single task is performed. If performing multiple tasks, the
window shows all configuration items. To check information of a configuration item, click Back to
return to the configuration window, and then click Help.
Create Pools wizard 259