HP XP P9500 Storage - Manual (Page 330)

Selected Ports table
Description Item
Identifier of the port. Port ID
Attribute of the port indicating I/O flow. Attribute
•
Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
•
RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
•
External: Issues I/O commands to a target port of an external storage
system with External Storage.
LUN security setting (enable or disable) on the port. Security
Data transfer speed for the selected fibre channel port in the unit of Gbps
(Gigabit per second). Speed
Address of the selected port. Address (Loop ID)
Status setting (enable or disable) for a fabric switch. FC Switch
Topology of the selected port. Connection Type
•
FC-AL: Fibre channel arbitrated loop
• P-to-P: Point-to-point
Create Alternative LUN Paths wizard
Create Alternative LUN Paths window
Description Item
Select the resource group in which the host group is created. If Any is
selected, among all ports being allocated to the user, ports where the host Resource Group Name (ID)
group can be add are available in the Available Ports table. If other than
Any is selected, among ports assigned to the selected resource group, ports
where the host group can be add are available in the Available Ports table.
Available Ports table
This table lists the ports for which alternate paths can be created.
330 LUN Manager GUI reference