HP XP P9500 Storage - Manual (Page 80)

Viewing monitor and tier relocation information
Monitor and tier relocation information appears in the Remote Web Console as follows:
•
Monitoring Status appears in the “Pools window after selecting pool (Pools window)” (page
245) and “Top window after selecting a pool volume group under Pool” (page 249) .
Shows the status of pool monitoring:
◦ In Progress: Monitoring is being performed.
◦ During Computation: The calculations are being processed.
Other than these cases, a hyphen appears.
•
Recent Monitor Data appears in the “Pools window after selecting pool (Pools window)” (page
245) and “Top window after selecting a pool volume group under Pool” (page 249) .
Shows the latest monitoring data:
◦ If monitoring data exists, the monitoring period of time appears.
Example: 2010/11/15 00:00 - 2010/11/15 23:59
◦ If monitoring data is being obtained, only the starting time appears.
Example: 2010/11/15 00:00 -
◦ If the latest monitoring data does not exist, a hyphen appears.
•
Relocation Progress Rate(%) appears in the “Pools window after selecting pool (Pools window)”
(page 245) and “Top window after selecting a pool volume group under Pool” (page 249) .
Shows the relocation (progress) rate if relocation is in operation. If the tier relocation is not
being performed, a hyphen appears. For details about the relocation progress rate, check the
tier relocation log. See
“Tier relocation log file contents” (page 84) for information about the
contents of the log.
•
Performance Graph appears in the “View Tier Properties window” (page 282)
The performance graph for the available monitor information appears in the View Tier Properties
window.
Execution modes when using RAID Manager
You can Using RAID Manager, only Manual execution mode can be specified for tier relocation.
80 Configuring thin provisioning