HP 3PAR Application Software Suite for Microsoft Exchange - Manual (Page 71)

•
-level log|Full - Optional. Verify the LOG files and DB files. To verify only LOG files,
use - level log. This cannot be used with the -nc option.
•
-exp n<h|H|d|D> - Optional. If the policy is expiration-based, set the expiration time for
this virtual copy to the specified time. Valid values are:
◦ To set the expiration time in hours: 1-43800h (or H)
◦ To set the expiration time in days: 1-1825d (or D)
◦ To remove the expiration period: 0h
◦ (For Exchange 2007) -lcr - Optional - Take the snapshot from the local continuous
replication copy.
◦ (For Exchange 2007)-active - Optional - Take the snapshot from the active CCR node
(applies for CCR configurations only). The active node is the default if -active is not
specified.
◦ (For Exchange 2007)-passive - Optional - Take the snapshot on the passive CCR node
(applies for CCR configurations only). The active node is the default if -passive or -active
are not specified.
◦ (For Exchange 2007)-both - Optional - Take the snapshot on both active and passive
nodes.
NOTE: If you specify an expiration time for a remote virtual copy:
•
If Remote Copy is set up in asynchronous periodic mode, HP 3PAR Recovery Manager for
Exchange sets the expiration time for the remote virtual copy on the backup server only, not
for the virtual copy created on the primary server.
•
If Remote Copy is set up in synchronous mode, HP 3PAR Recovery Manager for Exchange
sets the expiration time for both the virtual copy on the primary server and the remote virtual
copy on the backup server.
For more information, see the HP 3PAR Remote Copy Software User’s Guide.
HpRmCli Exch create 71