HP 3PAR Application Software Suite for Microsoft Exchange - Manual (Page 79)

HpRmCli Exch peer (For Exchange 2007)
SYNTAX
HpRmCli Exch peer -bs <peer_server>
or
Hprmcli Exch peer display
or
Hprmcli Exch peer clear
DESCRIPTION
The HpRmCli Exch peer command configures the peer backup servers for two HP 3PAR
StoreServ Storage System CCR configurations. The backup server executes all commands and
sends certain commands to the peer backup server to run (such as create and backup) for the
passive node option. Once the configuration is set, you need not run this command again unless
you want to change the peer relationship between the backup servers.
PARAMETERS
The following options are supported:
•
-bs <peer_server> - The server's name you would like to designate as your peer backup
server.
•
-display - Used if the -bs parameter is not used. Displays the current configuration of your
peer backup servers.
•
-clear - To remove the peer relationship between backup servers. Once the peer relationship
is removed, both backup servers are no long able to manage CCR nodes.
NOTE: The HpRmCli Exch peer command is intended only for CCR configuration. The -bs
option only needs to be run once to set up the peer relationship and to manage the CCR
configuration.
Examples
The following command will configure the peer backup server.
HpRmCli Exch peer -bs server1
HpRmCli Exch peer (For Exchange 2007) 79