HP Integrity NonStop H-Series - Manual (Page 119)

Closing the Second Window
Creating an Oversized Table
058060 Tandem Computers Incorporated 5–7
Using the arrow keys, position the cursor at the farthest right and
bottommost edge of the region. See the following example.
4. With the cursor marking the end of the region, press the REGION key.
Then press COPY. See the next example.
1) $MYVOL.MYSVOL.TABLE 1/12 (BOF) (EOF) 1:79
10:00 Break
Monreau publisher
Riveira finance
Strauss production
Yuen administration
12:00 Lunch
1:30 Ideas for next quarter
2:45 Break
2) $MYVOL.MYSVOL.AGENDA 10/20 (BOF) 1:79 C00.
Put the cursor here.
Press REGION, then
press COPY.
5. Press HOME to move the cursor into the top window (in the empty
TABLE file).
6. Press RETRIEVE. TEDIT retrieves the entire region you defined.
Note You can define a region from its beginning to its end or from its end to its beginning. In
either order, mark the topmost, leftmost edge and the bottommost, rightmost edge with the
cursor, pressing the DEFINEREGION key first and then the REGION key.
Closing the Second
Window
Now that you have copied all the text you want from the AGENDA file,
you can close the window. Here are three ways you can close a window:
1. Press *C. When you see the response line, type CLOSEWINDOW 2.
Press *C again.
2. Put the cursor in the window that you want to keep open. Press *C.
Type CLOSEWINDOW **. Press *C again.
3. Put the cursor in the window that you want to close. Press *C. Type
CLOSEWINDOW *. Press *C again.