HP Integrity NonStop H-Series - Manual (Page 94)

The Function-Keys Part of the Profile
Advanced Editing Features
058060 Tandem Computers Incorporated 4–9
3. When the response line appears, type RECONFIGURE FUNCTION-
KEYS (you can abbreviate it to REC F).
4. Press *C again. A display like Figure 4-1 appears. It is called the
RECONFIGURE FUNCTION-KEYS screen. You can make changes to
this screen just as you can to the RECONFIGURE OPTIONS screen.
Highlight The Function-Keys Part of the Profile
A profile consists of all the settings for options and function keys that
appear on the RECONFIGURE OPTIONS screen and the RECONFIGURE
FUNCTION-KEYS screen. The original (default) settings are assigned by
your TEDIT contact.
You can change the default settings for the function keys by changing the
assignments on the RECONFIGURE FUNCTION-KEYS screen, discussed
here. Changing the settings on the RECONFIGURE OPTIONS screen is
discussed in Section 3.
The function key assignments shown in the profile are the same as the ones
you see on the template. The ones shown in Figure 4-1 are for the unshifted
keys. Page two of the RECONFIGURE FUNCTION-KEYS screen shows the
shifted key assignments. To see the second page of the functions part of the
profile, press the
NEXT PAGE key on your terminal.