HP XP Command View Advanced Edition Software - Manual (Page 94)

Postrequisites
• Scanning the storage system
Related topics
• Scanning the storage system when using the CLI commands , page 94
• KTQRYDEV , page 153
• KTDEMO04 (Display the volume information) , page 253
Scanning the storage system when using the CLI commands
To scan the storage system, first execute the KTSCAN command, and then execute the KTSTORE
command to save the scan results.
Figure 21 Scanning the storage system (CLI commands)
Prerequisites
• To define a tiering policy group by specifying an SMS storage group or volume serial numbers,
place the volumes online to allow the volume serial numbers to be detected.
Procedure
1. Specify the scan range, and then execute the KTSCAN command.
The command acquires disk configuration information, and stores it in the host-discovered array
structure and host-discovered array index structure.
2. Execute the KTSTORE command.
The data in the host-discovered array structure is saved in the disk configuration definition file.
TIP:
To view the contents of the disk configuration definition file, execute the KTGETHDA command.
Smart Manager for Mainframe operations when using the CLI 94