HP Designjet T2500 eMultifunction Printer series - Manual (Page 130)

NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web Server job
submission settings.
● Color/Grayscale: you can choose to print in color, in shades of gray, or in black and white. Default: Print
in color.
● Select RGB source profile: you can choose from a selection of RGB source profiles recognized by the
printer. Default: sRGB.
● Emulate printer: you can choose to emulate a different HP Designjet printer. Default: Off (no printer
emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you can send
them to the printer and use the front panel to turn on the appropriate emulation mode.
T2500 PS options (with PostScript or PDF jobs)
● Select CMYK source profile: you can choose from a selection of CMYK source profiles recognized by the
printer. Default: US Coated SWOP v2.
● Select rendering intent: you can select the rendering intent. Default: Perceptual.
● Black point compensation: you can turn black point compensation on or off. Default: On.
● HP Professional PANTONE Emulation: you can turn HP Professional PANTONE Emulation on or off.
Default: On.
Color management and the scanner
The files obtained from your scanner (TIFF, JPEG, PDF) contain an embedded ICC profile corresponding to the
type of paper selected prior to making the scan. When you load these files into any image reader software
application, the information of the ICC profile is automatically used for optimum color appearance on your
monitor. When you print a scanned image, or copy an original, the embedded ICC profile is also automatically
used by the printer for optimum printing results.
120 Chapter 13 Color management ENWW