HP Designjet T2500 eMultifunction Printer series - Manual (Page 98)

10 Copying
Before starting to copy, see Paper types suitable for scanning on page 84 .
1. Load the sheet with the printed side facing upwards (you can also load the sheet before step 1, if you
prefer). Align the center of the sheet approximately with the center of the scanner. Use the standard
size markings to help you.
NOTE: The maximum length of paper that the scanner can scan depends on the paper width and the
scan resolution. An alert is displayed if the maximum length is exceeded.
2. Push the sheet into the insertion slot until you feel it contact the rollers. The scanner will automatically
grab the sheet and move it into position for scanning. If you feel that the sheet has loaded badly and
you want to try again, you can pull it out manually.
3.
At the front panel, go to the home screen and press .
4. Some of the default copy settings are displayed. Press Settings to see the complete list of settings, and
check in particular that the Paper type setting corresponds to the paper type that you intend to scan.
● Size allows you to resize the print in two different ways: to a percentage of its original size, or to
fit a particular paper size. The default is 100% (its original size).
● Copy quality allows you to set the print quality to Best, Normal or Fast.
88 Chapter 10 Copying ENWW