Tone dial or pulse dial, Set autoredial and the time between redials – HP LaserJet Pro 500 Color MFP M570 User Manual
Page 137
The factory-set default for detect dial tone is
On
for France and Hungary, and
Off
for all other countries/
regions.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Advanced Setup
menu.
4.
Scroll to and touch the
Detect Dial Tone
button, and then touch the
On
button.
Tone dial or pulse dial
Use this procedure to set the product to tone-dialing or pulse-dialing mode. The factory-set default is
Tone
.
Do not change this setting unless you know that the telephone line cannot use tone dialing.
NOTE:
The pulse-dialing option is not available in all countries/regions.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Advanced Setup
menu.
4.
Scroll to and touch the
Dialing Mode
button, and then touch the
Tone
or
Pulse
button.
Set autoredial and the time between redials
If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the
product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-
error options.
Set the redial-on-busy option
If this option is on, the product redials automatically if it receives a busy signal. The factory-set default for
the redial-on-busy option is
On
.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Advanced Setup
menu.
4.
Scroll to and touch the
Redial if Busy
button, and then touch the
On
button.
Set the redial-on-no-answer option
If this option is on, the product redials automatically if the receiving machine does not answer. The factory-
set default for the redial-on-no-answer option is
Off
.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Touch the
Fax Setup
menu.
3.
Touch the
Advanced Setup
menu.
4.
Scroll to and touch the
Redial if No Answer
button, and then touch the
On
button.
ENWW
Configure send fax settings 123