HP LaserJet Pro 500 Color MFP M570 - Manual (Page 217)

Set the fax error report
A fax error report is a brief report that indicates the product experienced a fax job error. You can set it to print
after the following events:
● Every fax error (the factory-set default)
● Send fax error
● Receive fax error
● Never
NOTE: With this option, you will have no indication that a fax failed to be transmitted unless you print
a fax activity log.
1. From the Home screen on the product control panel, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Fax Reports button.
4. Touch the Fax Error Report button, and then touch the printing option that you want to use.
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the
product detects an error during the transmission and the error-correction setting is On , the product can
request that the portion of the fax be resent. The factory-set default for error correction is On .
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are
willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen on the product control panel, touch the Setup button.
2. Touch the Service menu.
3. Touch the Fax Service menu.
4. Touch the Error Correction button, and then touch the On button.
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits per
second (bps). The factory-set default for the fax-speed setting is Fast(V.34) .
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device. Decreasing the fax speed might be useful when you are trying to send a fax overseas, or
receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen on the product control panel, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Fax Speed button, and then touch the speed setting that you want to use.
ENWW Solve fax problems 203