HP LaserJet Pro 500 Color MFP M570 - Manual (Page 42)

1. Slide open the tray.
NOTE: Do not open the tray while it is in use.
2. Adjust the paper-length and paper-width guides
by squeezing the adjustment latches and sliding
the guides to the size of the paper being used.
3. Load paper into the tray face-up. Check the paper
to verify the guides lightly touch the stack, but do
not bend it.
NOTE: To prevent jams, do not overfill the tray.
Be sure the top of the stack is below the tray-full
indicator.
NOTE: If the tray is not adjusted correctly, an
error message might display during printing or
the paper might jam.
4. Slide the tray into the product.
28 Chapter 2 Paper trays ENWW